Matt Acrylic

From: R75.00

Matt Acrylic suitable for interior and exterior use. Washable coating with low dirt pick up and high spreading rate.

Volume
Colour
Amazon
Belcini
Biscotti
Bone
Fawn
Fynbos
Grizly
Honey
Lime White
Maple
Plantation
Sandstone
Shaded White
Straw
Tuscan

Clear selection
SKU: MMAPS Category: Tags: ,

Description

CHARACTERISTICS

1. Washable high quality matt emulsion paint.
2. Outstanding durability and colour retention.
3. High hiding power.
4. Alkali and water resistant.
5. Low odor.
6. Water based ā€“ utensils cleaned with water.

USES

Recommended where a durable matt finish is required on interior or exterior surfaces.

TECHNICAL DATA

Type: Acrylic PVA Emulsion
Appearance: Matt finish
Drying time: Surface: 1 hour
Hard: 3 – 4 hours
Re-coating: 4 hours
Viscosity: 100 – 105 K.Uā€™s
S.G.: 1.30 – 1.40
Mass solids: 56 – 57%
Flash point: Non-flammable
Spreading Rate: 6 – 8 square meters per liter
Pack sizes: 1L, 5L, and 20L
Colour range: White and tint bases for all colour options.

APPLICATION

Ready for use with brush or roller.

CLEANING

Water.

PAINTING SPECIFICATIONS ā€“ NEW SURFACES

Preparation

1. Remove dust, dirt and plaster splashes.
2. Cut out large cracks and imperfections.
3. Make good with Multi-fill Crack filler.
4. Sand smooth when dry.

Painting brick, plaster and Gypsum plaster

1. Apply 1 coat of Pigmented Plaster Primer.
2. Apply 2 coats of Meridian Matt Acrylic.
3. Allow 4 hours drying between coats.

PAINTING SPECIFICATIONS – REDECORATION

Good condition

1. Wash down with sugar soap to remove all grease and other contaminants.
2. Repair all cracks with Multi-fill Crack Filler and spot prime with pigmented plaster primer.
3. Allow to dry and sand smooth.
4. Gloss, enamel and eggshell finishes must be sanded to a matt surface.
5. Rinse to remove dust wash and allow to dry.
6. Apply 2 coats of Wondercoat Vinyl Matt.
7. Allow 4 hours drying between coats.

Poor condition

1. Remove all loose, flaking and chalking material by wire brushing or other appropriate means.
2. Stop and fill all large cracks with Multi-fill Crack Filler.
3. Allow to dry and sand smooth.
4. Apply 1 coat of Pigmented plaster primer
5. Allow to dry for 4 hours.
6. Apply 2 coats of Meridian Matt Acrylic
7. Allow 4 hours drying between coats.

Additional information

Volume

1lt, 5lt, 20lt

Colour

Amazon, Belcini, Biscotti, Bone, Fawn, Fynbos, Grizly, Honey, Lime White, Maple, Plantation, Sandstone, Shaded White, Straw, Tuscan

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pin It on Pinterest

Share This