Low Sheen

Description

CHARACTERISTICS

1. Interior and exterior durability.
2. Stain resistant.
3. Abrasion resistant.
4. Low dirt retention.
5. Excellent adhesion and flexibility.
6. Fast drying and over coating properties.
7. Alkali and water resistant.
8. Fully washable, simply wipes clean.
9. Low odor.
10. Water based – equipment cleans with water.

USES

1. Recommended as the finishing coats where outstanding durability is required on interior and exterior surfaces.
2. Recommended for all high quality applications
3. Recommended where resistance to water, alkali and abrasion is required.
4. Recommended for re-decoration of sound painted surfaces.

TECHNICAL DATA

Type: Pure Acrylic Emulsion
Appearance: Low Sheen finish
Drying time: Surface: 1 hour
Hard: 3 – 4 hours
Re-coating: 4 – 24 hours
Viscosity: 95 – 100 K.U’s
S.G.: 1.25 – 1.3
Mass solids: 50 – 53%
Flash point: Non-flammable
Spreading rate: 8 – 10 square meters per liter
Pack sizes: 1L, 5L & 20L
Colour range: White tint bases for all colour options.

APPLICATION

Ready for use with brush, roller or texture roller.

CLEANING

Water.

PAINTING SPECIFICATIONS – NEW SURFACES

Preparation

1. Remove dust, dirt and plaster splashes.
2. Cut out large cracks and imperfections.
3. Make good with Multi-fill Crack filler.
4. Sand smooth when dry.
Painting brick, plaster and fibre cement
1. Apply 1 coat of Pigmented plaster primer.
2. Apply 2 coats of Meridian Low Sheen.
3. Allow 6 hours drying between coats.

Woodwork

1. Remove all dirt, grease, etc.
2. Sand to a smooth surface.
3. Dust off.
4. Apply 1 coat of Universal Undercoat.
5. Allow overnight drying.
6. Sand lightly and apply 2 coats of Meridian Low Sheen
7. Allow 6 hours drying between coats.

PAINTING SPECIFICATIONS – REDECORATION

Good condition

1. Wash down with sugar soap to remove all grease and other contaminants.
2. Repair all cracks with Multi-fill Crack Filler and spot prime with Pigmented Plaster
Primer.
3. Gloss Enamel and Eggshell enamel to be over coated with universal undercoat before applying Meridian Low Sheen.
4. Wash, rinse and allow to dry.
5. Apply 2 coats of Meridian Low Sheen.
6. Allow 4 hours drying between coats.

Poor condition

1. Remove all loose and flaking substrate
2. Stop and fill all large cracks with Multi-fill Crack Filler.
3. Sand smooth, rinse and allow to dry.
4. Apply 1 coat of Pigmented plaster primer.
5. Allow to dry for 4 hours.
6. Apply 2 coats of Meridian Low Sheen.
7. Allow 6 hours drying between coats.